ASTM A1008 e hanyetsanang le Corrosion Coil ea Pickled Steel

FAQs

• P: A na u ka fana ka litekanyo tsa tloaelo kapa likoahelo?

  Ruri. Re fana ka lits'ebeletso tsa Deep Customization:
  - Litekanyo: Bophara 200–2,000 mm, Botenya 0.3–25 mm
  - Liaparo: zinki e laoloang ka nepo (20–275 g/m²) kapa thini (1.1–11.2 g/m²)
  - Qetello ea sefahleho: likhetho tse 10+ (matt, seipone, tse hatisitsoeng, jj.)
  - Tlaleho ea ho khoneha e fanoe nakong ea lihora tse 48 bakeng sa likopo tsa tloaelo
  

• P: Ke matla afe a tensile / chai kapa boima ba lihlahisoa?

  A: Thepa e fapana ho latela ts'ebetso (mohlala, likhoele tse thata-thata: 1,200 MPa tensile strength; Zn-Fe alloy coatings: 150–220 HV hardness). Lintlha tse qaqileng li fumaneha ka litlhaloso tsa tekheniki kapa ka kopo.

• P: A na u ka fana ka litekanyo tsa tloaelo kapa likoahelo?

  Ruri. Re fana ka lits'ebeletso tsa Deep Customization:
  - Litekanyo: Bophara 200–2,000 mm, Botenya 0.3–25 mm
  - Liaparo: zinki e laoloang ka nepo (20–275 g/m²) kapa thini (1.1–11.2 g/m²)
  - Qetello ea sefahleho: likhetho tse 10+ (matt, seipone, tse hatisitsoeng, jj.)
  - Tlaleho ea ho khoneha e fanoe nakong ea lihora tse 48 bakeng sa likopo tsa tloaelo
  

• P: Ho tiisetsoa ha kutu / ho se mamelle ho tiisetsoa joang?

  A: Ho hanyetsa kutu ho matlafatsoa ka moralo oa alloy (mohlala, Zn-Ni, Fe-Zn layers), taolo ea porosity (

• P: The minimum order quantity (MOQ) ke bokae?

  MOQ e tloaelehileng e qala ho lithane tse 5 feela ka litaelo tse feto-fetohang tsa liteko:
  - Likhoele tse kolobisitsoeng ka ho chesa/tse batang: khoele e le 'ngoe (~ lithane tse 3)
  - Likhoele tse entsoeng ka galvanized/tinplate: 2 likhoele
  - Litlhaloso tsa tloaelo: lithane tse 15 (li-specs tse 3 tse tsoakiloeng li lumelletsoe)
  

• P: U etsa bonnete ba joang hore sehlahisoa se fumanoa le ho tsitsa?

  A: Taolo ea boleng bo felletseng e kenyelletsa tlhahlobo ea eddy-current (> 0.1 mm ponelopele ea crack), ho lekanya botenya, le tlhahlobo ea spray ea letsoai. Khoeli e 'ngoe le e 'ngoe e fanoa ka Setifikeiti sa Tlhahlobo ea Material (MTC) le tlaleho ea tlhahlobo.

• P: Lethathamo le tloaelehileng la litlhaloso?

  A: Botenya: 1.5mm ho 20mm (e ka fetoha ho ea ka mohala oa tlhahiso)
  Bophara: 600mm - 2200mm (bonyane / boholo bo boholo bo tlameha ho tšoauoa)
  Bophara ba ka hare: Φ610mm (e tloaelehileng) kapa Φ508mm (ka kopo netefatsa mohala oa tlhahiso ea k'hamphani)
  Bophara ba ka ntle: E khethoa ke boima ba moqolo, hangata ≤2500mm

• P: Mokhoa oa ho paka le ho tsamaisa?

  A: Liphutheloana tse tloaelehileng: Pampiri e sa keneleng mongobo + e tlamang ka tšepe ea tšepe, kapa sephutheloana se ikhethileng ho ea ka litlhoko tsa bareki (joalo ka mekotla ea lepolanka, filimi e sa keneleng metsi);
  Mekhoa ea lipalangoang: lipalangoang tsa litsela, lipalangoang tsa terene, lipalangoang tsa leoatle. Re ka thusa ho ikopanya le thepa kapa ho fana ka thepa ho latela thepa e boletsoeng ke moreki.

• P: Bophelo ba shelofo ea sehlahisoa ke nako e kae?

  K: Tlas'a maemo a tloaelehileng a polokelo (tikoloho e ommeng, e nang le moea o pholileng le e sa jeng), nako ea bophelo ke likhoeli tse 12 (ho tloha letsatsing la tlhahiso).

• Q: Mokhoa oa ho fumana mohlala?

  A: Mehlala e nyane e ka fanoa mahala (ho bokella thepa). Ka kopo, tlatsa "Foromo ea Mohlala ea Kopo" 'me u bontše morero.