Mofani oa tšepe ea tšepe ea boleng bo holimo e kentsoeng ka ho chesa

FAQs

• P: Lihlahisoa tsa hau li latela litekanyetso life tsa machaba?

  Sehlahisoa sa rona se felletseng se netefalitsoe ke ISO 9001 mme se latela litaelo tsa EU CE. Li-certification tsa bohlokoa li kenyelletsa:
  - tšepe ea mohaho: ISO 4996:2014 EN
  - Tšepe e entsoeng ka Galvanized: ASTM A653 / EN 10346
  - Tinplate: FDA 21 CFR 175.300 ho latela maemo a lijo
  - Lihlahisoa tsa tloaelo: Tšehetsa 20+ litekanyetso tsa lefats'e (JIS, GB, DIN, joalo-joalo)
  

• P: Ke matla afe a tensile / chai kapa boima ba lihlahisoa?

  A: Thepa e fapana ho latela ts'ebetso (mohlala, likhoele tse thata-thata: 1,200 MPa tensile strength; Zn-Fe alloy coatings: 150–220 HV hardness). Lintlha tse qaqileng li fumaneha ka litlhaloso tsa tekheniki kapa ka kopo.

• P: A na u ka fana ka litekanyo tsa tloaelo kapa likoahelo?

  Ruri. Re fana ka lits'ebeletso tsa Deep Customization:
  - Litekanyo: Bophara 200–2,000 mm, Botenya 0.3–25 mm
  - Liaparo: zinki e laoloang ka nepo (20–275 g/m²) kapa thini (1.1–11.2 g/m²)
  - Qetello ea sefahleho: likhetho tse 10+ (matt, seipone, tse hatisitsoeng, jj.)
  - Tlaleho ea ho khoneha e fanoe nakong ea lihora tse 48 bakeng sa likopo tsa tloaelo
  

• P: Ho tiisetsoa ha kutu / ho se mamelle ho tiisetsoa joang?

  A: Ho hanyetsa kutu ho matlafatsoa ka moralo oa alloy (mohlala, Zn-Ni, Fe-Zn layers), taolo ea porosity (

• P: Lihlahisoa tsee li loketse liindasteri life?
  A na u ka fana ka litharollo tse ikhethileng indastering?

  K: Li sebelisoa haholo likoloing (likarolo tsa 'mele, lirim tsa mabili), lisebelisoa (HVAC, lihatsetsi), liphutheloana (likoti tsa lijo, lijana tsa aerosol), le lisebelisoa tsa indasteri (ho roka, lisebelisoa tsa temo). Re ntlafatsa litlolo bakeng sa litlhoko tse khethehileng tsa indasteri.

• P: U etsa bonnete ba joang hore sehlahisoa se fumanoa le ho tsitsa?

  A: Taolo ea boleng bo felletseng e kenyelletsa tlhahlobo ea eddy-current (> 0.1 mm ponelopele ea crack), ho lekanya botenya, le tlhahlobo ea spray ea letsoai. Khoeli e 'ngoe le e 'ngoe e fanoa ka Setifikeiti sa Tlhahlobo ea Material (MTC) le tlaleho ea tlhahlobo.

• P: Lethathamo le tloaelehileng la litlhaloso?

  A: Botenya: 1.5mm ho 20mm (e ka fetoha ho ea ka mohala oa tlhahiso)
  Bophara: 600mm - 2200mm (bonyane / boholo bo boholo bo tlameha ho tšoauoa)
  Bophara ba ka hare: Φ610mm (e tloaelehileng) kapa Φ508mm (ka kopo netefatsa mohala oa tlhahiso ea k'hamphani)
  Bophara ba ka ntle: E khethoa ke boima ba moqolo, hangata ≤2500mm

• P: Na lits'ebetso tsa tlhahiso li tsamaisana le tikoloho?
  Na liphahlo li ka sebelisoa hape?

  K: Re sebelisa passivation e se nang chromium, liphekolo tse se nang halogen, le mekhoa e meng e bonolo ea tikoloho (e lumellanang le RoHS, ELV). Liaparo li ka sebelisoa hape ka 100% ka ho hlobolisa electrolytic (mohlala, tinplate detinning).

• P: Bophelo ba shelofo ea sehlahisoa ke nako e kae?

  K: Tlas'a maemo a tloaelehileng a polokelo (tikoloho e ommeng, e nang le moea o pholileng le e sa jeng), nako ea bophelo ke likhoeli tse 12 (ho tloha letsatsing la tlhahiso).

• P: O ka fana ka tataiso ea tekheniki?

  A: Re ka fana ka litlhahiso tsa ho sebetsana le litšepe tse kolobisitsoeng ka ho chesa (tse kang mekhoa ea ho seha le ea ho cheselletsa), tharollo ea boemo ba ts'ebeliso, kapa ra hlophisa tšehetso ea tekheniki sebakeng sa marang-rang ho tsoa ho baenjiniere (ho hlokahala hore ho behoe mosebetsi pele ho nako).